{"id":5337,"date":"2025-06-05T17:25:10","date_gmt":"2025-06-05T15:25:10","guid":{"rendered":"https:\/\/www.ubside.fr\/expertises\/characterisation-of-materials-and-products\/"},"modified":"2025-12-18T12:14:29","modified_gmt":"2025-12-18T11:14:29","slug":"characterisation-of-materials-and-products","status":"publish","type":"expertise","link":"https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/","title":{"rendered":"Characterisation of materials and products"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\tWhy <\/span>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

\n\t\t\t\t\tchoose<\/span>\n\t\t\t\t\n\t\t\t\t\tthis expertise?<\/span>\n\t\t\t\t<\/span>\n\t\t\t\t<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Are you looking to: \n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
  • Evaluate raw materials (fibers, resins, prepregs), test specimens, or finished parts to verify compliance with your requirements?<\/span><\/li>
  • Measure mechanical or chemical properties, thermal behavior, and obtain a complete test report with analysis of results?<\/span><\/li>
  • Compare different materials through standardized tests to guide your design choices?<\/span><\/li>
  • Identify and understand failures or malfunctions in a composite part?<\/span><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
    \n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    UBSIDE supports you from initial assessment to implementation.
    Our experts advise you on the most relevant tests, testing parameters, and applicable standards. After the tests, our team guides you in interpreting the results and defining the next steps. <\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

    \n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t

    \n\t\t\t\t\tOur <\/span>\n\t\t\t\t\n\t\t\t\t\tcustomized<\/span>\n\t\t\t\t<\/span>\n\t\t\t\t\tservices<\/span>\n\t\t\t\t\t<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
    \n\t\t
    \n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Test Selection\n\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
    \n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Test Execution <\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
    \n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Standard Adaptation or Custom Testing\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
    \n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Service Details<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\n\t\t\t\t\t Test Selection Based on Your Needs <\/span><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    A multitude of standardized and customized tests can be performed depending on your product. UBSIDE helps you determine the appropriate tests to implement your material roadmap and ensure your product meets all technical and regulatory requirements. <\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t

    \n\t\t\t\t\n\t\t\t\t\t Execution of Standardized or Non-Standard Tests with Result Interpretation <\/span><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    UBSIDE ensures rapid responsiveness: we adapt our timelines to your constraints to help you save time.<\/span><\/p>

    Our teams assist you in analyzing and interpreting your test results, identifying improvement opportunities, and supporting decision-making.<\/span><\/p>

    All tests are carried out according to current international standards (ISO, EN, ASTM, \u2026).<\/span><\/p>

    Implementation<\/b><\/p>

    • Manufacturing of resin plates<\/span><\/li>
    • Manufacturing of composite plates and NOL rings using automated fiber placement (AFP or EF) processes<\/span><\/li>
    • Production of plastic\/composite parts using 3D printing<\/span><\/li><\/ul>
      <\/div>

      Sample Preparation Before Testing<\/b><\/p>

      • Specimen cutting<\/span><\/li>
      • Specimen conditioning (thermo-hygrometric, acid\/base baths, etc.)<\/span><\/li>
      • Specimen instrumentation (strain gauges)<\/span><\/li><\/ul>
        <\/div>

        Mechanical characterization<\/b><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

        \n\t\t\t\t
        \n\t\t\t\t\t
        \n
        \n\t\t\t\t\t\t\t\t
        \n\t\t\n\t\t\t\t\t<\/div>\n\t<\/th>\n\t\t\n\t\t\n\t\t\tEssais m\u00e9caniques\t\t<\/div>\n\t<\/th>\n\t\t\n\t\t\n\t\t\tNormes associ\u00e9es\t\t<\/div>\n\t<\/th>\n\t <\/tr><\/thead>
        \n\t\t\n\t\t\t\n\t\t\t\t

        BENDING<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        3-point bending for composite(-60 \u00e0 200\u00b0C)
        3-point bending for polymer and resin (-60 \u00e0 200\u00b0C)
        4-point bending for composite (-60 \u00e0 200\u00b0C)
        4-point bending for polymer and resin (23\u00b0C)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        ISO14125
        ISO178\/ASTM D790
        ISO14125\/ASTM D7264
        ASTM D6415<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t

        \n\t\t\n\t\t\t\n\t\t\t\t

        TENSILE<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        Tensile test for composite (-60 \u00e0 200\u00b0C)
        Tensile test for polymer and resin (-60 \u00e0 200\u00b0C)
        Transverse tensile test (sens 33)
        NOL or split-disc tensile (23\u00b0C)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        ISO527\/ASTM D3039
        ISO527\/ASTM D638
        ASTM D7291
        ASTM D2290<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t

        \n\t\t\n\t\t\t\n\t\t\t\t

        COMPRESSION<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        Compression for composite (-60 \u00e0 200\u00b0C)
        Compression for polymer and resin (-60 \u00e0 200\u00b0C)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        ISO14126
        ISO3386 (flexible cellular polymers\/foams\/rubbers)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t

        \n\t\t\n\t\t\t\n\t\t\t\t

        SHEAR<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        In-plane shear strength for composite (-60 \u00e0 200\u00b0C)
        Sandwich shear strength (-60 \u00e0 100\u00b0C)
        Out-of-plane shear strength for composite (-60 \u00e0 200\u00b0C)
        Interlaminar shear strength (ILSS)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        ISO14129
        ASTM C393
        ASTM D7078\/ASTM D5379
        ISO14130<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t

        \n\t\t\n\t\t\t\n\t\t\t\t

        CRACKING<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        Cracking for composite G1C\/G2C (-60 \u00e0 200\u00b0C)
        Cracking for polymer and resin K1C (-60 \u00e0 200\u00b0C)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        ASTM D5528 => G1C
        ASTM D7905 => G2C
        ISO13586<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t

        \n\t\t\n\t\t\t\n\t\t\t\t

        FATIGUE<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        Fatigue tests for resin and composite<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        Depending on the type of test<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t <\/tbody><\/table><\/div>\n\n\n\n<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        Physicochemical characterisation<\/b><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

        \n\t\t\t\t
        \n\t\t\t\t\t
        \n
        \n\t\t\t\t\t\t\t\t\t
        \n\t\t\n\t\t\tEssais physico-chimiques\t\t<\/div>\n\t<\/th>\n\t\t\n\t\t\n\t\t\tNormes associ\u00e9es\t\t<\/div>\n\t<\/th>\n\t <\/tr><\/thead>
        \n\t\t\n\t\t\t\n\t\t\t\t

        Density \/ Porosity<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        ISO1183<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t

        \n\t\t\n\t\t\t\n\t\t\t\t

        Composite fibre content<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        Carbon: EN2564
        Glass: ISO1172<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t

        \n\t\t\n\t\t\t\n\t\t\t\t

        Properties evaluation by DSC<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        Carbon: EN2564
        Glass: ISO1172<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t

        \n\t\t\n\t\t\t\n\t\t\t\t

        Properties evaluation by DMA<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        Carbon: EN2564
        Glass: ISO1172<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t

        \n\t\t\n\t\t\t\n\t\t\t\t

        Properties evaluation by TGA<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        ISO11358<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t

        \n\t\t\n\t\t\t\n\t\t\t\t

        Polymer rheology<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        Depending on the type of test<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t

        \n\t\t\n\t\t\t\n\t\t\t\t

        Resin rheology<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t

        		\n\t\t\n\t\t\t\n\t\t\t\t

        Depending on the type of test<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t <\/tbody><\/table><\/div>\n\n\n\n<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        Morphological Characterization<\/b><\/p>

        • Microscopic observations (optical microscopy \/ SEM)<\/span><\/li>
        • Component identification via EDX analysis<\/span><\/li>
        • Material health monitoring (porosity, fiber content, ply thickness, etc.)<\/span><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t
          \n\t\t\t\t\n\t\t\t\t\t Adaptation of Standards or Custom Testing <\/span><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Would you like to go further or adapt the tests to your own internal standards?<\/b>
          <\/span>Our team of experts is here to support you by adjusting test parameters or designing a fully customized protocol and equipment, perfectly tailored to your product and objectives.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

          \n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t

          \n\t\t\t\t\tOur<\/span>\n\t\t\t\t\n\t\t\t\t\tadded value<\/span>\n\t\t\t\t<\/span>\n\t\t\t\t<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Choosing UBSIDE means relying on an expert team capable of specifying the most relevant tests and interpreting results in light of the materials and processes used. We go beyond delivering raw data: we help you understand, challenge, and maximize the value of your results \u2014 even recommending adjustments to tests or to the product itself. Our approach is collaborative, agile, and solution-oriented. <\/span><\/p>

          It also means choosing tailored support that adapts to your deadlines and remains flexible with respect to both normative and specific requirements. We strive to answer your most critical questions: Is my part compliant? Is my process reliable and repeatable? Are the data used for my design calculations accurate? Has my material expired, or is it still valid for use? <\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

          \n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t

          \n\t\t\t\t\tTechnical<\/span>\n\t\t\t\t\n\t\t\t\t\tmeans<\/span>\n\t\t\t\t<\/span>\n\t\t\t\t<\/h2>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t\t\t\t\t
          \n\t\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          \"\"<\/figure>

          Static or dynamic mechanical testing machines with capacities from 50 N to 500 kN<\/h3><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
          \n\t\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          \"\"<\/figure>

          Optical microscopy \/ SEM \/ EDX<\/h3><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
          \n\t\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          \"\"<\/figure>

          Permeability measurement equipment<\/h3><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
          \n\t\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          \"\"<\/figure>

          Thermal analysis equipment (TGA, DSC, DMA)<\/h3><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
          \n\t\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          \"\"<\/figure>

          Evaluation of rheological behaviour (liquid, molten)<\/h3><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t
          \n\t\t\t\t<\/path><\/svg>\t\t\t<\/div>\n\t\t\t
          \n\t\t\t\t<\/path><\/svg>\t\t\t<\/div>\n\t\t\t\t\t
          <\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
          \n\t\t\t\t\t
          \n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

          Measure, compare, control: gain essential insights into your polymer and composite materials.
          We help you understand the behavior of your materials at every scale, from the mesoscopic to the macroscopic level.<\/p>\n","protected":false},"featured_media":0,"template":"elementor_theme","meta":{"_acf_changed":false},"domaine":[117,118,116],"secteur-activite":[119,129,120,123,121,122,126,124,128],"sous-domaine":[130],"class_list":["post-5337","expertise","type-expertise","status-publish","hentry","domaine-materials-processing","domaine-pressure-vessels","domaine-sustainable-polymer-materials","secteur-activite-aerospace","secteur-activite-assistive-technologies-for-disabilities","secteur-activite-automotive","secteur-activite-defense-en","secteur-activite-drones-en","secteur-activite-naval-nautical","secteur-activite-packaging","secteur-activite-sports-and-leisure","secteur-activite-tooling","sous-domaine-additive-manufacturing-of-composites"],"acf":[],"yoast_head":"\nMaterial and Product Characterization: Technical Analyses and Measurements<\/title>\n<meta name=\"description\" content=\"Analyses, Testing, and Inspection to Characterize Polymer, Composite, and Industrial Products.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Material and Product Characterization: Technical Analyses and Measurements\" \/>\n<meta property=\"og:description\" content=\"Analyses, Testing, and Inspection to Characterize Polymer, Composite, and Industrial Products.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/\" \/>\n<meta property=\"og:site_name\" content=\"Ubside\" \/>\n<meta property=\"article:modified_time\" content=\"2025-12-18T11:14:29+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.ubside.fr\/uploads\/2025\/06\/Machine-dessais-mecaniques-statiques-ou-dynamiques-de-capacite-50-N-a-500-kN-rotated.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"650\" \/>\n\t<meta property=\"og:image:height\" content=\"867\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/expertise\\\/characterisation-of-materials-and-products\\\/\",\"url\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/expertise\\\/characterisation-of-materials-and-products\\\/\",\"name\":\"Material and Product Characterization: Technical Analyses and Measurements\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/expertise\\\/characterisation-of-materials-and-products\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/expertise\\\/characterisation-of-materials-and-products\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.ubside.fr\\\/uploads\\\/2025\\\/06\\\/Machine-dessais-mecaniques-statiques-ou-dynamiques-de-capacite-50-N-a-500-kN-rotated.jpg\",\"datePublished\":\"2025-06-05T15:25:10+00:00\",\"dateModified\":\"2025-12-18T11:14:29+00:00\",\"description\":\"Analyses, Testing, and Inspection to Characterize Polymer, Composite, and Industrial Products.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/expertise\\\/characterisation-of-materials-and-products\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.ubside.fr\\\/en\\\/expertise\\\/characterisation-of-materials-and-products\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/expertise\\\/characterisation-of-materials-and-products\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.ubside.fr\\\/uploads\\\/2025\\\/06\\\/Machine-dessais-mecaniques-statiques-ou-dynamiques-de-capacite-50-N-a-500-kN-rotated.jpg\",\"contentUrl\":\"https:\\\/\\\/www.ubside.fr\\\/uploads\\\/2025\\\/06\\\/Machine-dessais-mecaniques-statiques-ou-dynamiques-de-capacite-50-N-a-500-kN-rotated.jpg\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/expertise\\\/characterisation-of-materials-and-products\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/homepage\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Expertise\",\"item\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/expertise\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Characterisation of materials and products\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/\",\"name\":\"Ubside\",\"description\":\"Ensemble, boostons votre capital R&D\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/#organization\",\"name\":\"Ubside\",\"url\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.ubside.fr\\\/uploads\\\/2025\\\/06\\\/logo_baseline-blanc.svg\",\"contentUrl\":\"https:\\\/\\\/www.ubside.fr\\\/uploads\\\/2025\\\/06\\\/logo_baseline-blanc.svg\",\"caption\":\"Ubside\"},\"image\":{\"@id\":\"https:\\\/\\\/www.ubside.fr\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Material and Product Characterization: Technical Analyses and Measurements","description":"Analyses, Testing, and Inspection to Characterize Polymer, Composite, and Industrial Products.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/","og_locale":"en_US","og_type":"article","og_title":"Material and Product Characterization: Technical Analyses and Measurements","og_description":"Analyses, Testing, and Inspection to Characterize Polymer, Composite, and Industrial Products.","og_url":"https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/","og_site_name":"Ubside","article_modified_time":"2025-12-18T11:14:29+00:00","og_image":[{"width":650,"height":867,"url":"https:\/\/www.ubside.fr\/uploads\/2025\/06\/Machine-dessais-mecaniques-statiques-ou-dynamiques-de-capacite-50-N-a-500-kN-rotated.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/","url":"https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/","name":"Material and Product Characterization: Technical Analyses and Measurements","isPartOf":{"@id":"https:\/\/www.ubside.fr\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/#primaryimage"},"image":{"@id":"https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ubside.fr\/uploads\/2025\/06\/Machine-dessais-mecaniques-statiques-ou-dynamiques-de-capacite-50-N-a-500-kN-rotated.jpg","datePublished":"2025-06-05T15:25:10+00:00","dateModified":"2025-12-18T11:14:29+00:00","description":"Analyses, Testing, and Inspection to Characterize Polymer, Composite, and Industrial Products.","breadcrumb":{"@id":"https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/#primaryimage","url":"https:\/\/www.ubside.fr\/uploads\/2025\/06\/Machine-dessais-mecaniques-statiques-ou-dynamiques-de-capacite-50-N-a-500-kN-rotated.jpg","contentUrl":"https:\/\/www.ubside.fr\/uploads\/2025\/06\/Machine-dessais-mecaniques-statiques-ou-dynamiques-de-capacite-50-N-a-500-kN-rotated.jpg"},{"@type":"BreadcrumbList","@id":"https:\/\/www.ubside.fr\/en\/expertise\/characterisation-of-materials-and-products\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.ubside.fr\/en\/homepage\/"},{"@type":"ListItem","position":2,"name":"Expertise","item":"https:\/\/www.ubside.fr\/en\/expertise\/"},{"@type":"ListItem","position":3,"name":"Characterisation of materials and products"}]},{"@type":"WebSite","@id":"https:\/\/www.ubside.fr\/en\/#website","url":"https:\/\/www.ubside.fr\/en\/","name":"Ubside","description":"Ensemble, boostons votre capital R&D","publisher":{"@id":"https:\/\/www.ubside.fr\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.ubside.fr\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.ubside.fr\/en\/#organization","name":"Ubside","url":"https:\/\/www.ubside.fr\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.ubside.fr\/en\/#\/schema\/logo\/image\/","url":"https:\/\/www.ubside.fr\/uploads\/2025\/06\/logo_baseline-blanc.svg","contentUrl":"https:\/\/www.ubside.fr\/uploads\/2025\/06\/logo_baseline-blanc.svg","caption":"Ubside"},"image":{"@id":"https:\/\/www.ubside.fr\/en\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/www.ubside.fr\/en\/wp-json\/wp\/v2\/expertise\/5337","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ubside.fr\/en\/wp-json\/wp\/v2\/expertise"}],"about":[{"href":"https:\/\/www.ubside.fr\/en\/wp-json\/wp\/v2\/types\/expertise"}],"version-history":[{"count":2,"href":"https:\/\/www.ubside.fr\/en\/wp-json\/wp\/v2\/expertise\/5337\/revisions"}],"predecessor-version":[{"id":5698,"href":"https:\/\/www.ubside.fr\/en\/wp-json\/wp\/v2\/expertise\/5337\/revisions\/5698"}],"wp:attachment":[{"href":"https:\/\/www.ubside.fr\/en\/wp-json\/wp\/v2\/media?parent=5337"}],"wp:term":[{"taxonomy":"domaine","embeddable":true,"href":"https:\/\/www.ubside.fr\/en\/wp-json\/wp\/v2\/domaine?post=5337"},{"taxonomy":"secteur-activite","embeddable":true,"href":"https:\/\/www.ubside.fr\/en\/wp-json\/wp\/v2\/secteur-activite?post=5337"},{"taxonomy":"sous-domaine","embeddable":true,"href":"https:\/\/www.ubside.fr\/en\/wp-json\/wp\/v2\/sous-domaine?post=5337"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}